Common Trade Names: 2205, UNS S32205, 00Cr22Ni5Mo3N,W.Nr 1.4462
Duplex stainless steel 2205 alloy is a duplex stainless steel composed of 22% chromium, 2.5% molybdenum and 4.5% nickel-nitrogen alloy. It has high strength , good impact toughness and good overall and local stress corrosion resistance.The yield strength of 2205 duplex stainless steel is more than twice that of ordinary austenitic stainless steel . This feature enables designers to reduce weight when designing products, making this alloy more cost-effective than 316 and 317L. This alloy is particularly suitable for the temperature range of -50°F/+600°F.
Duplex Stainless Steel 2205 Chemical Composition
| chemical composition |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
N |
| standard |
≤0.03 |
≤1.00 |
≤2.00 |
≤0.04 |
≤0.03 |
21.0~24.0 |
4.5~6.5 |
2.5~3.5 |
0.08~0.2 |
| general |
0.025 |
0.6 |
1.5 |
0.026 |
0.001 |
22.5 |
5.8 |
3.0 |
0.16 |
Duplex Stainless Steel 2205 Physical Properties
|
Density
|
7.8 g/cm³
|
|
Melting point
|
2525- 2630°F
|
Duplex Stainless Steel 2205 Mechanical Properties
|
Alloy status
|
Tensile strength
Rm N/mm²
|
Yield strength
RP0.2 N/mm²
|
Elongation
A5 %
|
Brinell hardness HB
|
|
Normal
|
≥450
|
≥620
|
≥25
|
-
|
Duplex Stainless Steel 2205 Standards and Specifications
ASME SA 182, ASME SA 240, ASME SA 479, ASME SA 789, ASME SA 789 Section IV Code Case 2603
ASTM A 240, ASTM A 276, ASTM A 276 Condition A, ASTM A 276 Condition S, ASTM A 479, ASTM A 790
NACE MR0175/ISO 15156
Duplex Stainless Steel 2205 Available Products in Sekonic Metals
Steel 2205 Bars & Rods
Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts
Steel 2205 Wire
Supply in welding wire and spring wire in coil form and cut length.
Steel 2205 sheet & plate
Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm to 100mm.
Standards size and customized dimension can be produced by us with small tolerance
Steel 2205 strip & coil
Soft condition and hard condition with AB bright surface, width up to 1000mm
Steel 2205 Fasteners
This materials in forms of Bolts,screws,flanges and other fasterners, according to clients specification.
Why Duplex Stainless Steel 2205 ?
1) The yield strength is more than twice that of ordinary austenitic stainless steel, and it has the necessary requirements for forming
Sufficient plasticity. The wall thickness of storage tanks or pressure vessels made of duplex stainless steel is 30-50% less than that of commonly used austenite, which is beneficial to reduce costs.
2) It has excellent resistance to stress corrosion cracking. Even the duplex stainless steel with the lowest alloy content has higher resistance to stress corrosion cracking than austenitic stainless steel, especially in an environment containing chloride ions. Stress corrosion is a prominent problem that is difficult to solve for ordinary austenitic stainless steel.
3) The corrosion resistance of 2205 duplex stainless steel, which is most commonly used in many media, is better than ordinary 316L austenitic stainless steel, while super duplex stainless steel has extremely high corrosion resistance. In some media, such as acetic acid and formic acid It can even replace high-alloy austenitic stainless steel and even corrosion-resistant alloys .
4) It has good local corrosion resistance. Compared with austenitic stainless steel with the same alloy content, its wear corrosion resistance and fatigue corrosion resistance are better than austenitic stainless steel.
5) The coefficient of linear expansion is lower than that of austenitic stainless steel , which is close to that of carbon steel. It is suitable for connection with carbon steel and has important engineering significance, such as the production of composite plates or linings.
6) Whether under dynamic or static load conditions, it has a higher energy absorption capacity than austenitic stainless steel. This is for structural parts to cope with sudden accidents such as collisions and explosions. Duplex stainless steel has obvious advantages and has practical application value.
Duplex Stainless Steel 2205 Application field：
Pressure vessels, high-pressure storage tanks, high-pressure pipes, heat exchangers (chemical processing industry).
• Oil and gas pipelines, heat exchanger fittings.
• Sewage treatment system.
• Pulp and paper industry classifiers, bleaching equipment, storage and processing systems.
• Rotary shafts, press rolls, blades, impellers, etc. under high-strength and corrosion-resistant environments.
• Cargo boxes of ships or trucks
• Food processing equipment
Our company Products Forms
Inconel / Hastelloy/ Monel/ Haynes 25/ Titanium
Nickel/ Titanium Alloy tubes, U-bend /heat exchange tube
Inconel 601/ Hastelloy C22/Inconel x750/Inconel 625 ect
Hastelloy/Inconel/ Incoloy/ Cobalt/Tianium
Hastelloy/Inconel/ invar/ soft magnetic Alloys ect
Inconel 718/Inconel x750/ Nimonic 80A
Cobalt Alloy wire, Nickel alloy wire,Tianium Alloy wire
Monel 400/ Hastelloy C276/ Inconel 718/ Titanium
Inconel x750/ Inconel 718 /Monel 400 ect
Call us today at 0086 15921454807 or email info@sekonicmetal.com
Canot found the information or the material or the products you want to?
Contact Us!