♦ Material: Inconel 625(UNSNO6625)
♦ Size:M6-M36 or as per clients requirements
♦ OD 15.5-66.0mm ID:8.4-37.0mm
♦ Thickness:1.4mm-5.6mm or as per clients requiriments
♦ Application ：Aero-engine parts and Aerospace structural parts
♦ Other Meaterials : Inconel 718, Inconel x750 ect
Contact Us to Learn More !Inconel Alloy 625 is a non-magnetic, corrosion and oxidation resistant, nickel-chromium alloy. The high strength of Inconel 625 is the result of the stiffening combination of molybdenum and niobium on the nickel chromium base of the alloy. Inconel 625 has tremendous resistance to a wide range of unusually severe corrosive environments including high-temperature effects such as oxidation and carburization. Its outstanding strength and toughness in temperature ranges from cryogenic temperatures to high temperature up to 2000° F (1093° C) are derived primarily from the solid solution effects of the refractory metals Columbium and molybdenum in a nickel-chromium matrix.Common applications for this alloy are springs, seals, bellows for submerged controls, electrical cable connectors, fasteners, flexure devices, and oceanographic instrument components.
Inconel 625 Chemical Composition|
% |
Ni |
Cr |
Fe |
Mo |
Nb+Ta |
Co |
C |
Mn |
Si |
S |
Al |
Ti |
P |
|
Min. |
58.0 |
20.0 |
- |
8.0 |
3.15 |
- | - | - | - | - |
- |
- | - |
|
Max. |
- |
23.0 |
5.0 |
10.0 |
4.15 |
1.0 |
0.1 |
0.5 |
0.5 |
0.015 |
0.4 |
0.4 |
0.015 |
| Density | 8.4 g/cm³ |
| Melting point |
1290-1350 ℃
|
| Status |
Tensile strength Rm N/mm² |
Yield strength Rp 0. 2N/mm² |
Elongation As % |
Brinell hardness HB |
| Solution treatment | 827 | 414 | 30 | ≤220 |
Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts
Supply in welding wire and spring wire in coil form and cut length.
Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm to 100mm.
Standards size and customized dimension can be produced by us with small tolerance
Soft condition and hard condition with AB bright surface, width up to 1000mm
Alloy 625 we can offer bolts,Nuts and other fasteners as clients requirements
1.High creep-rupture strength
2.Oxidation resistant to 1800°F
3.Good fatigue resistance
4.Excellent weldability
5.Outstanding resistance to chloride pitting and crevice corrosion
6.Immune to chloride ion stress corrosion cracking
7.Resistant to seawater under both flowing and stagnant conditions and under fouling
• Aircraft ducting systems
• Jet engine exhaust systems
• Engine thrust-reverser systems
• Bellows and expansion joints
• Turbine shroud rings
• Flare stacks
• Seawater components
• Chemical process equipment handling mixed acids both oxidizing and reducing.
Inconel / Hastelloy/ Monel/ Haynes 25/ Titanium
Nickel/ Titanium Alloy tubes, U-bend /heat exchange tube
Inconel 601/ Hastelloy C22/Inconel x750/Inconel 625 ect
Hastelloy/Inconel/ Incoloy/ Cobalt/Tianium
Hastelloy/Inconel/ invar/ soft magnetic Alloys ect
Inconel 718/Inconel x750/ Nimonic 80A
Cobalt Alloy wire, Nickel alloy wire,Tianium Alloy wire
Monel 400/ Hastelloy C276/ Inconel 718/ Titanium
Inconel x750/ Inconel 718 /Monel 400 ect