♦ Material: Inconel 718
♦ Size:M8-M36 or as per clients requirements
♦ OD 15.5-66.0mm ID:8.4-37.0mm
♦ Thickness:1.4mm-5.6mm or as per clients requiriments
♦ Application ：Aero-engine parts and Aerospace structural parts
♦ Other Meaterials : Inconel 625, Inconel x750 ect
Contact Us to Learn More !Inconel® 718 is a precipitation-hardening nickel-chromium alloy with a high strength and good ductility up to 1300°F (704°C). this Alloy containing significant amounts of iron, columbium, and molybdenum, along with lesser amounts of aluminum and titanium.Nickel 718 also has relatively good weldability, formability, and excellent cryogenic properties compared to other precipitation hardening nickel alloys. The sluggish precipitation hardening response of this alloy allows it to be readily welded without hardening or cracking. Alloy 718 is non-magnetic. It maintains good corrosion resistance and oxidation resistance and is used for parts requiring high resistance to creep and stress rupture up to 1300°F (704°C) and oxidation resistance up to 1800°F (982°C).
Inconel 718 Chemical Composition| Alloy |
% |
Ni |
Cr |
Fe |
Mo |
Nb |
Co |
C |
Mn |
Si |
S |
Cu |
Al |
Ti |
|
718 |
Min. |
50 |
17 |
balance |
2.8 |
4.75 |
0.2 |
0.7 |
||||||
|
Max. |
55 |
21 |
3.3 |
5.5 |
1 |
0.08 |
0.35 |
0.35 |
0.01 |
0.3 |
0.8 |
1.15 |
| Density | 8.24 g/cm³ |
| Melting point |
1260-1320 ℃
|
| Status |
Tensile strength Rm N/mm² |
Yield strength Rp 0. 2N/mm² |
Elongation As % |
Brinell hardness HB |
| Solution treatment | 965 | 550 | 30 | ≤363 |
Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fasteners and other spare parts
Supply in welding wire and spring wire in coil form and cut length.
Dimension can be customized with bright surface and precision tolerance.
Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm to 100mm.
Standards size and customized dimension can be produced by us with small tolerance
Spring with AMS5699 Standards according to clients drawing or specification
Soft condition and hard condition with AB bright surface, width up to 1000mm
Can be produced according to clients drawing or smaples with precision tolerance.
Alloy 718 materials in forms of Bolts,screws,flanges and other fasterners, according to clients specification.
Inconel 718 is Austenitic structure, precipitation hardening generate “γ” made it excellent mechanical performance. G rain boundary generate “δ” made it the best plasticity in the heat treatment.with extremely resistance to stress corrosion cracking and pitting ability in high temperature or low temperature environments, especially the inoxidability in the high temperature.
1.workability
2.High tensile strength,endurance strength,creep strength and rupture strength at 700℃.
3.High inoxidability at1000℃.
4.Steady mechanical performance in the low temperature.
The elevated temperature strength, excellent corrosion resistance and workability at 700℃ properties made it use in a wide range of high requirement environments.Inconel grades are fit for use in the production of components that are employed in the severe environments such as turbocharger rotors & seals, motor shafts for electric submersible well pump, steam generators, tubes for heat exchangers, firearm sound suppressor blast baffles and in machine guns, black box recorders in aeroplanes etc.
• Steam turbine
• Liquid-fuel rocket
• Cryogenic engineering
• Acid environment
• Nuclear engineering
Inconel / Hastelloy/ Monel/ Haynes 25/ Titanium
Nickel/ Titanium Alloy tubes, U-bend /heat exchange tube
Inconel 601/ Hastelloy C22/Inconel x750/Inconel 625 ect
Hastelloy/Inconel/ Incoloy/ Cobalt/Tianium
Hastelloy/Inconel/ invar/ soft magnetic Alloys ect
Inconel 718/Inconel x750/ Nimonic 80A
Cobalt Alloy wire, Nickel alloy wire,Tianium Alloy wire
Monel 400/ Hastelloy C276/ Inconel 718/ Titanium
Inconel x750/ Inconel 718 /Monel 400 ect