Stainless Steel PH15-7MO

Common Trade Names: Ph15-7Mo,15-7MoPH, S15700, 07Cr15Ni7Mo2Al ,W.Nr 1.4532

15-7M0Ph steel alloy can withstand all kinds of cold forming and welding process under the condition of austenite.Then through heat treatment can obtain 

the highest strength; Under 550 ℃ with excellent high temperature strength,was designed to have greater toughness than 17-4 PH. The  alloy is martensitic in structure in the annealed condition and is further strengthened by a relatively low temperature heat treatment which precipitates a copper containing phase in the alloy. 

Steel 15-7Mo Chemical Composition

C	Cr	Ni	Mo	Si	Mn	P	S	Al
≤0.09	14.0-16.0	6.5-7.75	2.0-3.0	≤1.0	≤1.0	≤0.04	≤0.03	0.75-1.5

Steel 15-7Mo Physical Properties

Density (g/cm3)	Electrical resistivity （μΩ·m）
7.8	0.8

Steel 15-7Mo Mechanical Properties

Condition		бb/N/mm2	б0.2/N/mm2	δ5/%	ψ	HRW
Precipitation hardening	510℃ ageing	1320	1210	6	20	≥388
	565℃ ageing	1210	1100	7	25	≥375

Steel Steel 15-7Mo Standards and Specifications

AMS 5659, AMS 5862,ASTM-A564 ,W. Nr./EN 1.4532

Steel 15-7Mo Available Products in Sekonic Metals

Steel 15-7Mo Bars & Rods

Round bars/Flat bars/Hex bars,     Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts

Steel 15-7Mo Wire

Supply in welding wire and spring wire in coil form and cut length.

Steel 15-7Mo sheet & plate

Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm  to 100mm.

Steel 15-7Mo seamless tube & Welded pipe

Standards size and  customized dimension can be produced by us with small tolerance

Steel 15-7Mo strip & coil

Soft condition and hard condition with AB bright surface, width up to 1000mm

Steel 15-7Mo Gasket/ Ring

Dimension can be customized with bright surface and precision tolerance.

Why Steel Steel 15-7Mo?

• Can withstand all kinds of cold forming and welding process under the condition of austenite.then through heat treatment can obtain the highest
  strength ,Under 550 ℃ with excellent high temperature strength.

• Electric welding property：The steel can adopt arc welding, resistance welding and gas shielded arc welding, gas shielded welding is the best.
     Welding is often done in materials solid solution treatment conditions,and do not need to preheat before welding.
     When welding requires high strength, the 17-7 with lower content of δ- ferrite is chosen mostly,austenitic stainless steel welding wire can be used

Steel 15-7Mo Application field：

Applied to make aviation thin-wall structure components, all kinds of containers, pipes, spring, valve film, ship shaft,
compressor plate, reactor components,  as well as a variety of structure components of chemical equipment, etc.