Titanium Bar

Titanium bar and Titanium Rod can be used in the drawing parts for its good elongation and excellent corrosion-resistance and most widely applied in pressure,vessel and used in some fittings parts and fastening pieces, like titanium fasteners. Titanium bar and titanium rod also can be widely used in the titanium alloys because of its comprehensive mechanical and chemical properties. In addition, titanium bar and titanium rod can be used in the golf clubs and bicycle girders and medical appliance. Two types of Titanium rods are available: pure Titanium rods and Titanium alloy rods such as Ti-6AI-4V. They can be used in aircraft engines and parts, chemical equipment parts (reactors, pipes, heat exchangers and valves, etc.), ship hulls, bridges, medical implants, artificial bones, sporting products and consumer goods.

• Tittanium Bar Materials: Grade1, Grade 2, Grade 5, Grade 5, Grade7 ,Grade9,Grade11, Grade12, Grade 16, Grade23 ect

• Bar Shapes: Round Bar, Flat Bar, Hex Bar, Square bar

• Diameter:2.0mm-320mm, Length: 50mm-6000mm, Customized

• Conditions: Hot Forging & Hot Rolling,Cold Rolled, Annealed

• Standards: ASTMB348, AMS4928, AMS 4931B, ASTM F67, ASTM F136 etc

Titanium   Alloys   Material   Common   Name
Gr1	UNS R50250	CP-Ti
Gr2	UNS R50400	CP-Ti
Gr4	UNS R50700	CP-Ti
Gr7	UNS R52400	Ti-0.20Pd
G9	UNS R56320	Ti-3AL-2.5V
G11	UNS R52250	Ti-0.15Pd
G12	UNS R53400	Ti-0.3Mo-0.8Ni
G16	UNS R52402	Ti-0.05Pd
G23	UNS R56407	Ti-6Al-4V ELI

    ♦  Titanium  Bar  Chemical  Composition  ♦              

 

Grade	Chemical composition, weight percent (%)
	C (≤)	O (≤)	N (≤)	H (≤)	Fe (≤)	Al	V	Pd	Ru	Ni	Mo	Other Elements Max. each	Other Elements Max. total
Gr1	0.08	0.18	0.03	0.015	0.20	—	—	—	—	—	—	0.1	0.4
Gr2	0.08	0.25	0.03	0.015	0.30	—	—	—	—	—	—	0.1	0.4
Gr4	0.08	0.25	0.03	0.015	0.30	—	—	—	—	—	—	0.1	0.4
Gr5	0.08	0.20	0.05	0.015	0.40	5.5   6.75	3.5 4.5	—	—	—	—	0.1	0.4
Gr7	0.08	0.25	0.03	0.015	0.30	—	—	0.12 0.25	—	0.12 0.25	—	0.1	0.4
Gr9	0.08	0.15	0.03	0.015	0.25	2.5 3.5	2.0 3.0	—	—	—	—	0.1	0.4
Gr11	0.08	0.18	0.03	0.15	0.2	—	—	0.12 0.25	—	—	—	0.1	0.4
Gr12	0.08	0.25	0.03	0.15	0.3	—	—	—	—	0.6 0.9	0.2 0.4	0.1	0.4
Gr16	0.08	0.25	0.03	0.15	0.3	—	—	0.04 0.08	—	—	—	0.1	0.4
Gr23	0.08	0.13	0.03	0.125	0.25	5.5 6.5	3.5 4.5	—	—	—	—	0.1	0.1

     ♦  Titanum  Alloy  Bars   Physical  Properties  ♦         

 

Grade	Physical properties
	Tensile strength Min		Yield strength Min (0.2%,offset)		Elongation in 4D Min (%)	Reduction of Area Min (%)
	ksi	MPa	ksi	MPa
Gr1	35	240	20	138	24	30
Gr2	50	345	40	275	20	30
Gr4	80	550	70	483	15	25
Gr5	130	895	120	828	10	25
Gr7	50	345	40	275	20	30
Gr9	90	620	70	483	15	25
Gr11	35	240	20	138	24	30
Gr12	70	483	50	345	18	25
Gr16	50	345	40	275	20	30
Gr23	120	828	110	759	10	15

♦  ♦  ♦  Titanium Alloy Materials Features:  ♦  ♦  ♦           

• Grade 1: Pure Titanium, relatively low strength and high ductility.

• Grade 2: The pure titanium most used. The best combination of strength

• Grade 3: High strength Titanium, used for Matrix-plates in shell and tube heat exchangers

• Grade 5: The most manufactured titanium alloy. Exceedingly high strength. high heat resistance.

• Grade 7: Superior corrosion resistance in reducing and oxidizing environments.

• Grade 9: Very high strength and corrosion resistance.

• Grade 12: Better heat resistance than pure Titanium. Applications as for Grade 7 and Grade 11.

• Grade 23: Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for surgical implant application.