Titanium Wire

Titanium Wire  The titanium wire is usually used for welding, frames, surgical implants, decoration, electroplating hanging fixture.Used in the production of spherical titanium powder. Wire use the titanium bar  or Titanium slab tinto the mold to process, due to the pulling effect, the titanium bar deforms under high temperature when through the hole of the mould. The cross section is reduced, and the length increased. Stretching in a heated state helps to eliminate the internal stress and improve the plasticity of titanium wires. It effectively improves the precision of the titanium wire, and the surface finish, which can achieve a better comprehensive performance.

•  Tittanium Wire Materials: Grade1, Grade 2, Grade 5, Grade 5, Grade7 ,Grade9,Grade11, Grade12, Grade 16, Grade23 ect

•  Wire Forms: Spool in Coil, Cut length/Straight

•  Diameter:0.05mm-8.0mm

•  Conditions: Solution Annealed ,Hot rolling, Stretching

•  Surface: Pickling White,Bright Polished , Acid Washed, Black oxide

•  Standards: ASTM B863, AWS A5.16, ASTM F67, ASTM F136 etc

Titanium   Alloys   Material   Common  Name
Gr1	UNS R50250	CP-Ti
Gr2	UNS R50400	CP-Ti
Gr4	UNS R50700	CP-Ti
Gr7	UNS R52400	Ti-0.20Pd
G9	UNS R56320	Ti-3AL-2.5V
G11	UNS R52250	Ti-0.15Pd
G12	UNS R53400	Ti-0.3Mo-0.8Ni
G16	UNS R52402	Ti-0.05Pd
G23	UNS R56407	Ti-6Al-4V ELI

    ♦  Titanium  Wire  Chemical  Composition  ♦              

 

Grade	Chemical composition, weight percent (%)
	C (≤)	O (≤)	N (≤)	H (≤)	Fe (≤)	Al	V	Pd	Ru	Ni	Mo	Other Elements Max. each	Other Elements Max. total
Gr1	0.08	0.18	0.03	0.015	0.20	—	—	—	—	—	—	0.1	0.4
Gr2	0.08	0.25	0.03	0.015	0.30	—	—	—	—	—	—	0.1	0.4
Gr4	0.08	0.25	0.03	0.015	0.30	—	—	—	—	—	—	0.1	0.4
Gr5	0.08	0.20	0.05	0.015	0.40	5.5-   6.75	3.5 4.5	—	—	—	—	0.1	0.4
Gr7	0.08	0.25	0.03	0.015	0.30	—	—	0.12 0.25	—	0.12 0.25	—	0.1	0.4
Gr9	0.08	0.15	0.03	0.015	0.25	2.5 3.5	2.0 3.0	—	—	—	—	0.1	0.4
Gr11	0.08	0.18	0.03	0.15	0.2	—	—	0.12 0.25	—	—	—	0.1	0.4
Gr12	0.08	0.25	0.03	0.15	0.3	—	—	—	—	0.6 0.9	0.2 0.4	0.1	0.4
Gr16	0.08	0.25	0.03	0.15	0.3	—	—	0.04 0.08	—	—	—	0.1	0.4
Gr23	0.08	0.13	0.03	0.125	0.25	5.5 6.5	3.5 4.5	—	—	—	—	0.1	0.1

    ♦  Titanum  Alloy  Wire   Physical  Properties  ♦         

 

Grade	Physical properties
	Tensile strength Min		Yield strength Min (0.2%,offset)		Elongation in 4D Min (%)	Reduction of Area Min (%)
	ksi	MPa	ksi	MPa
Gr1	35	240	20	138	24	30
Gr2	50	345	40	275	20	30
Gr4	80	550	70	483	15	25
Gr5	130	895	120	828	10	25
Gr7	50	345	40	275	20	30
Gr9	90	620	70	483	15	25
Gr11	35	240	20	138	24	30
Gr12	70	483	50	345	18	25
Gr16	50	345	40	275	20	30
Gr23	120	828	110	759	10	15

         ♦  ♦  ♦   Titanium   Alloy   Materials   Features: ♦  ♦  ♦                                                      

• Grade 1: Pure Titanium, relatively low strength and high ductility.

• Grade 2: The pure titanium most used. The best combination of strength

• Grade 3: High strength Titanium, used for Matrix-plates in shell and tube heat exchangers

• Grade 5: The most manufactured titanium alloy. Exceedingly high strength. high heat resistance.

• Grade 9: Very high strength and corrosion resistance.

• Grade 12: Better heat resistance than pure Titanium. Applications as for Grade 7 and Grade 11.

• Grade 23: Titanium-6Aluminum-4Vanadium for surgical implant application.