17-7PH is austenitic-martensitic precipitation hardening stainless steel developed on the basis of 18-8CrNi, also known as controlled phase change stainless steel.At the solution treating temperature, 1900°F, the metal is austenitic but undergoes transformation to a low-carbon martensitic structure during cooling to room temperature. This transformation is not complete until the temperature drops to 90°F. Subsequent heating to temperatures of 900-1150°F for one to four hours precipitation strengthens the alloy. This hardening treatment also tempers the martensitic structure, increasing ductility and toughness
17-7PH Chemical Composition| C | Cr | Ni | Si | Mn | P | S | Al |
| ≤0.09 | 16.0-18.0 | 6.5-7.75 | ≤1.0 | ≤1.0 | ≤0.04 | ≤0.03 | 0.75-1.5 |
| Density (g/cm3) | Melting point（℃） |
| 7.65 | 1415-1450 |
| Condition | бb/N/mm2 | б0.2/N/mm2 | δ5/% | ψ | HRW | |
| Solution treatment | ≤1030 | ≤380 | 20 | － | ≤229 | |
| Precipitationhardening | 510℃ageing | 1230 | 1030 | 4 | 10 | ≥383 |
| 565℃ageing | 1140 | 960 | 5 | 25 | ≥363 | |
AMS 5604, AMS 5643, AMS 5825,ASME SA 564, ASME SA 693, ASME SA 705, ASME Type 630,ASTM A 564, ASTM A 693, ASTM A 705, ASTM Type 630
Condition A - H1150,ISO 15156-3,NACE MR0175,S17400,UNS S17400,W. Nr./EN 1.4548
| Bar/Rod | Wire | Strip/Coil | Sheet/Plate | Pipe/Tube |
Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts
Supply in welding wire and spring wire in coil form and cut length.
Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm to 100mm.
Standards size and customized dimension can be produced by us with small tolerance
Soft condition and hard condition with AB bright surface, width up to 1000mm
17-7PH materials in forms of Bolts,screws,flanges and other fasterners, according to clients specification.
• High tensile strength and hardness to 600°F
• Corrosion resistant
• Excellent oxidation resistance to about 1100°F
• Creep-rupture strength to 900°F
• Gate valves
• Chemical processing equipment
• Pump shafts, gears, plungers
• Valve stems, balls, bushings, seats
• Fasteners