Home Categories Send inquiry

GH3030 XH78T Sheet/Plate/ Bar/Wire

Common Trade Names: GH3030,GH30 ,Зи435,XH78T

GH3030 solid solution reinforced superalloy is an early 80Ni-20Cr solid solution strengthened superalloy. It has simple chemical composition, satisfactory thermal strength and high plasticity below 800℃, and good oxidation resistance, thermal fatigue, cold stamping and welding process properties.
After solution treatment, the alloy is single phase austenite, and the structure is stable during use.
Turbine engine combustor components to be used for work below 800℃ and other high-temperature components that require oxidation resistance but bear little load below 1100℃.
GH3030 has strong performance of hot processing waste cold processing, used for making various chemical equipment and accessories.

GH3030 Chemical Composition
Alloy

%

Fe

Cr

Ni

C

Mn

Si

S

P

Al

Ti

GH3030

Min.

-

19

balance

- - - - - - 0.15

Max.

1.5

22

0.12 0.7 0.8 0.02 0.03 0.15 0.35
GH3030 Physical Properties
Density 8.4 g/cm³
Melting point 1374-1420 ℃
GH3030 Mechanical Properties
Status Tensile strength 
Rm N/mm²
Yield strength 
Rp 0. 2N/mm²
Elongation 
As %
Brinell hardness HB
Solution treatment 785 - 35 -

 

GH3030 Available Products in Sekonic Metals

GH3030 bars & Rods

Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts

GH3030 Forging Ring

Forging Ring or gasket,size can be customized with bright surface and precision tolerance

GH3030 sheet & plate

Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm  to 100mm.

GH3030 seamless tube & Welded pipe

Standards size and  customized dimension can be produced by us with small tolerance

GH3030 strip & coil

Soft condition and hard condition with AB bright surface, width up to 1000mm

GH3030 Fasteners

GH3030 materials  in forms of Bolts,screws,flanges and other fasterners, according to clients specification.

Why GH3030 ? 

 Solid solution reinforced superalloy, simple chemical composition,
• It has satisfactory thermal strength and high plasticity below 800 ℃.
• And has good oxidation resistance, thermal fatigue, cold stamping and welding process properties.
• After solution treatment, the alloy is single phase austenite, and the structure is stable during use.

GH3030 Application field:

The alloy has been used in aero-engine for a long time, and is mainly used in combustor and afterburner parts as well as casing mounting edge parts