Home Categories Send inquiry

Inconel 625 Disc Ring/ Joint ring/ Washer/gasket

Inconel 625 Disc Ring/ Washer/ Gasket/ Joint Ring

 Material: Inconel 625(UNSNO6625)

 Size:M6-M36  or as per clients requirements

 OD 15.5-66.0mm   ID:8.4-37.0mm

 Thickness:1.4mm-5.6mm or as per clients requiriments

 Application :Aero-engine parts and Aerospace structural parts

 Other  Meaterials : Inconel 718, Inconel x750 ect

Contact Us to Learn More !

 Inconel Alloy 625 is a non-magnetic, corrosion and oxidation resistant, nickel-chromium alloy. The high strength of Inconel 625 is the result of the stiffening combination of molybdenum and niobium on the nickel chromium base of the alloy. Inconel 625 has tremendous resistance to a wide range of unusually severe corrosive environments including high-temperature effects such as oxidation and carburization. Its outstanding strength and toughness in temperature ranges from cryogenic temperatures to high temperature up to 2000° F (1093° C) are derived primarily from the solid solution effects of the refractory metals Columbium and molybdenum in a nickel-chromium matrix.Common applications for this alloy are springs, seals, bellows for submerged controls, electrical cable connectors, fasteners, flexure devices, and oceanographic instrument components.

Inconel 625 Chemical Composition

%

Ni

Cr

Fe

Mo

Nb+Ta

Co

C

Mn

Si

S

Al

Ti

P

Min.

58.0 

20.0

-

8.0

3.15

 -  -

-

Max.

-

23.0

5.0

10.0

4.15

1.0

0.1

0.5

0.5

0.015

0.4

0.4

0.015

Inconel 625 Physical Properties
Density 8.4 g/cm³
Melting point 1290-1350 ℃

 

Inconel 625 Alloy minimum mechanical properties in the roomtemperature
Status Tensile strength 
Rm N/mm²
Yield strength 
Rp 0. 2N/mm²
Elongation 
As %
Brinell hardness HB
Solution treatment 827 414 30 ≤220

 

Inconel 625 Available Products in Sekonic Metals

Inconel 625 Bars & Rods

Round bars/Flat bars/Hex bars,     Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts

Inconel 625 welding wire

Supply in welding wire and spring wire in coil form and cut length.

Inconel 625 sheet & plate

Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm  to 100mm.

Inconel 625 seamless tube & Welded pipe

Standards size and  customized dimension can be produced by us with small tolerance

Inconel 625 strip & coil

Soft condition and hard condition with AB bright surface, width up to 1000mm

Inconel 625 Fasteners

Alloy 625 we can offer bolts,Nuts and other fasteners as clients requirements

 Inconel 625 Features : 

1.High creep-rupture strength
2.Oxidation resistant to 1800°F
3.Good fatigue resistance
4.Excellent weldability
5.Outstanding resistance to chloride pitting and crevice corrosion
6.Immune to chloride ion stress corrosion cracking
7.Resistant to seawater under both flowing and stagnant conditions and under fouling

Inconel 625 Application field:

• Aircraft ducting systems
• Jet engine exhaust systems
• Engine thrust-reverser systems
• Bellows and expansion joints
• Turbine shroud rings
• Flare stacks
• Seawater components
• Chemical process equipment handling mixed acids both oxidizing and reducing.

Our company Products Forms

Bars & Rods

Inconel / Hastelloy/ Monel/ Haynes 25/ Titanium

Seamless Tube & Welded Tube

Nickel/ Titanium Alloy tubes, U-bend /heat exchange tube

Bolt & Nuts

Inconel 601/ Hastelloy C22/Inconel x750/Inconel 625 ect

Sheet & Plates

Hastelloy/Inconel/ Incoloy/ Cobalt/Tianium

Strip & Foil

Hastelloy/Inconel/ invar/ soft magnetic Alloys ect

High Temperature Springs

Inconel 718/Inconel x750/ Nimonic 80A

Wire & Welding

Cobalt Alloy wire, Nickel alloy wire,Tianium Alloy wire

Special Alloy Flanges

Monel 400/ Hastelloy C276/ Inconel 718/ Titanium

Oil Tube Hanger

Inconel x750/ Inconel 718 /Monel 400 ect

Nickel Based Alloys

Welding Materials

Cobalt Based Alloys

Special Stainless Steels

Precision Alloys

Titanium Alloys

Want to Learn More or get a quote ?

Get in Touch