Stainless steel F55 is a duplex (austenitic-ferritic) stainless steel containing about 40 - 50% ferrite in the annealed condition. F55 has been a practical solution to chloride stress corrosion cracking problems experienced with 304/304L or 316/316L stainless. The high chromium, molybdenum and nitrogen contents provide corrosion resistance superior to 316/316L and 317L stainless in most environments. F55 is not suggested for operating temperatures up to 600°F
|
Alloy |
% |
Ni |
Cr |
Mo |
N |
C |
Mn |
Si |
S |
P |
Cu |
W |
|
F55 |
Min. |
6 |
24 |
3 |
0.2 |
|
|
|
|
|
0.5 |
0.5 |
|
Max. |
8 |
26 |
4 |
0.3 |
0.03 |
1 |
1 |
0.01 |
0.03 |
1 |
1 |
Stainless Steel F53 (2507) Physical Properties
| Density | 8.0 g/cm³ |
| Melting point | 1320-1370 ℃ |
|
Alloy status |
Tensile strength |
Yield strength RP0.2 N/mm² |
Elongation |
Brinell hardness HB |
|
Solution treatment |
820 |
550 |
25 |
- |
ASME SA 182, ASME SA 240, ASME SA 479, ASME SA 789, ASME SA 789 Section IV Code Case 2603
ASTM A 240, ASTM A 276, ASTM A 276 Condition A, ASTM A 276 Condition S, ASTM A 479, ASTM A 790
NACE MR0175/ISO 15156
Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts
Supply in welding wire and spring wire in coil form and cut length.
Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm to 100mm.
Standards size and customized dimension can be produced by us with small tolerance
Soft condition and hard condition with AB bright surface, width up to 1000mm
This materials in forms of Bolts,screws,flanges and other fasterners, according to clients specification.
F55(S32760 ) combines high mechanical strength and good ductility with corrosion resistance to marine environments and performs at ambient and sub zero temperatures. High resistance to abrasion, erosion and cavitation erosion and also used in sour service operation
Primarily used for oil & gas and marine applications being typically used for pressure vessels, valves chokes, Xmas trees, flanges and pipework