Titanium Plate Target

Product Detail

Titanium Target :We use titanium alloy billet,or plate to machined into titanium targets.The impurity content of industrial pure titanium is more than that of chemical pure titanium, so its strength and hardness are slightly higher. Its mechanical and chemical properties are similar to those of stainless steel. Compared with titanium alloy, pure titanium has better strength and has better oxidation resistance. It is better than austenitic stainless steel, but its heat resistance is poor. TA1, TA2, TA3 increase in impurity content, mechanical strength and hardness increase in order, but plastic toughness decreases in order.

• Tittanium Plate Target: Grade1, Grade 2, Grade 5, Grade 5, Grade7 ,Grade9,Grade11, Grade12, Grade 16, Grade23 ect

• Types:Round Target, Pipe Target, Plate Target.ect

• Dimension:60/80/120(W)×6/8/12(T)×519/525/620(L) &60-800(W)×6-40(T)×600-2000(L)Customized

•Surface: bright surface or Acid pickling surface

• Applications: used in semiconductor separation devices, flat-panel displays, storage electrode films, sputtering coating, workpiece surface coating, glass coating industry, etc.

Titanium Alloys Material Common Name
Gr1	UNS R50250	CP-Ti
Gr2	UNS R50400	CP-Ti
Gr4	UNS R50700	CP-Ti
Gr7	UNS R52400	Ti-0.20Pd
G9	UNS R56320	Ti-3AL-2.5V
G11	UNS R52250	Ti-0.15Pd
G12	UNS R53400	Ti-0.3Mo-0.8Ni
G16	UNS R52402	Ti-0.05Pd
G23	UNS R56407	Ti-6Al-4V ELI

♦ Titanium Alloys Chemical Composition ♦

Grade	Chemical composition, weight percent (%)
Grade	C (≤)	O (≤)	N (≤)	H (≤)	Fe (≤)	Al	V	Pd	Ru	Ni	Mo	Other Elements Max. each	Other Elements Max. total
Gr1	0.08	0.18	0.03	0.015	0.20	—	—	—	—	—	—	0.1	0.4
Gr2	0.08	0.25	0.03	0.015	0.30	—	—	—	—	—	—	0.1	0.4
Gr4	0.08	0.25	0.03	0.015	0.30	—	—	—	—	—	—	0.1	0.4
Gr5	0.08	0.20	0.05	0.015	0.40	5.5 6.75	3.5 4.5	—	—	—	—	0.1	0.4
Gr7	0.08	0.25	0.03	0.015	0.30	—	—	0.12 0.25	—	0.12 0.25	—	0.1	0.4
Gr9	0.08	0.15	0.03	0.015	0.25	2.5 3.5	2.0 3.0	—	—	—	—	0.1	0.4
Gr11	0.08	0.18	0.03	0.15	0.2	—	—	0.12 0.25	—	—	—	0.1	0.4
Gr12	0.08	0.25	0.03	0.15	0.3	—	—	—	—	0.6 0.9	0.2 0.4	0.1	0.4
Gr16	0.08	0.25	0.03	0.15	0.3	—	—	0.04 0.08	—	—	—	0.1	0.4
Gr23	0.08	0.13	0.03	0.125	0.25	5.5 6.5	3.5 4.5	—	—	—	—	0.1	0.1

♦ Titanum Alloy Physical Properties ♦

Grade	Physical properties
	Tensile strength Min		Yield strength Min (0.2%,offset)		Elongation in 4D Min (%)	Reduction of Area Min (%)
	ksi	MPa	ksi	MPa	Elongation in 4D Min (%)	Reduction of Area Min (%)
Gr1	35	240	20	138	24	30
Gr2	50	345	40	275	20	30
Gr4	80	550	70	483	15	25
Gr5	130	895	120	828	10	25
Gr7	50	345	40	275	20	30
Gr9	90	620	70	483	15	25
Gr11	35	240	20	138	24	30
Gr12	70	483	50	345	18	25
Gr16	50	345	40	275	20	30
Gr23	120	828	110	759	10	15