Titanium Sheet and Plate

Product Detail

• Tittanium Sheet Materials: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 • Shapes: Forging Sheet, Cold Rolling Sheet, Hot Rolling Sheet • Dimension: Thickness: 0.3～5mm, Width: 400～3000mm, Length: ≤6000mm • Conditions: Hot Forging & Hot Rolling,Cold Rolled, SolutionAnnealed • Standards: ASTM B265, AMS 4911, AMS 4902, ASTM F67, ASTM F136 etc

Titanium Alloys Material Common Name
Gr1	UNS R50250	CP-Ti
Gr2	UNS R50400	CP-Ti
Gr4	UNS R50700	CP-Ti
Gr7	UNS R52400	Ti-0.20Pd
G9	UNS R56320	Ti-3AL-2.5V
G11	UNS R52250	Ti-0.15Pd
G12	UNS R53400	Ti-0.3Mo-0.8Ni
G16	UNS R52402	Ti-0.05Pd
G23	UNS R56407	Ti-6Al-4V ELI

Titanium Sheet and Titanium Plate: We mainly provide pure titanium sheet of Gr1, Gr2, Gr4 grades; For titanium alloy sheet, We mainly provide Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 and other grades,They are produced on the basis of titanium plate with further cold rolling; the production process of titanium sheet is more complicated. The deformation control is more strictly in the process of rolling.That can be cut in different sizes according to the customer’s needs, greatly shorten the time of delivery.

♦ Titanium Sheet Chemical composition ♦

Grade	Chemical composition, weight percent (%)
Grade	C (≤)	O (≤)	N (≤)	H (≤)	Fe (≤)	Al	V	Pd	Ru	Ni	Mo	Other Elements Max. each	Other Elements Max. total
Gr1	0.08	0.18	0.03	0.015	0.20	—	—	—	—	—	—	0.1	0.4
Gr2	0.08	0.25	0.03	0.015	0.30	—	—	—	—	—	—	0.1	0.4
Gr4	0.08	0.25	0.03	0.015	0.30	—	—	—	—	—	—	0.1	0.4
Gr5	0.08	0.20	0.05	0.015	0.40	5.5 6.75	3.5 4.5	—	—	—	—	0.1	0.4
Gr7	0.08	0.25	0.03	0.015	0.30	—	—	0.12 0.25	—	0.12 0.25	—	0.1	0.4
Gr9	0.08	0.15	0.03	0.015	0.25	2.5 3.5	2.0 3.0	—	—	—	—	0.1	0.4
Gr11	0.08	0.18	0.03	0.15	0.2	—	—	0.12 0.25	—	—	—	0.1	0.4
Gr12	0.08	0.25	0.03	0.15	0.3	—	—	—	—	0.6 0.9	0.2 0.4	0.1	0.4
Gr16	0.08	0.25	0.03	0.15	0.3	—	—	0.04 0.08	—	—	—	0.1	0.4
Gr23	0.08	0.13	0.03	0.125	0.25	5.5 6.5	3.5 4.5	—	—	—	—	0.1	0.1

♦ Titanum Alloy Sheet Physical properties ♦

Grade	Physical properties
	Tensile strength Min		Yield strength Min (0.2%,offset)		Elongation in 4D Min (%)	Reduction of Area Min (%)	Bend Test(Radius of Mandrel)
	ksi	MPa	ksi	MPa	Elongation in 4D Min (%)	Reduction of Area Min (%)	＜1.8mm In thicknes	1.8-4.8mm In thickness
Gr1	35	240	20	138	24	30	1.5T	2.0T
Gr2	50	345	40	275	20	30	2.0T	2.5T
Gr4	80	550	70	483	15	25	2.5T	3.0T
Gr5	130	895	120	828	10	25	4.5T	5.0T
Gr7	50	345	40	275	20	30	2.0T	2.5T
Gr9	90	620	70	483	15	25	2.5T	3.0T
Gr11	35	240	20	138	24	30	1.5T	2.0T
Gr12	70	483	50	345	18	25	2.0T	2.5T
Gr16	50	345	40	275	20	30	2.0T	2.5T
Gr23	120	828	110	759	10	15	4.5T	5.0T